You are not logged in or registered. Please login or register to use the full functionality of this board...

Post Reply 
Graphite Rod repair needed
05-29-2012, 08:47 AM (This post was last modified: 05-29-2012 09:33 AM by fishfight.)
Post: #3
RE: Graphite Rod repair needed
When the damage is close to the tip, I believe nothing you can do to patch them together, you can still salvage the rod, but it will have to be shorter. The action will not be the same, The continued stress of fighting a fish will eventually break apart whatever you do to patch the broken section close to the tip.

The salvage shorter stiffer rod has its benefit. The tip might not be as sensitive for coarse fishing, but for cranking a lure , it will be even more effective using a rod with backbone versus using a noodle like rod.

To repair other broken section aside from the tip. You must cut any visible damage or crack on the graphite fiber, or it will eventually just stretch out more under duress. Once you are able to clean it, put some epoxy glue inside to strenthen that section before adding the final guide.

If the damage is somewhere else except the tip section, you can patch the rod by cutting a 3-5" section from another discarded rod, using a diameter that will compliment/fit the outer diameter of the original damage area of the rod. There are more procedure that needs to be done to strengthen that area. The action will not be the same, but the rod will still be usable. I posted the details on rod repair at Ontraiofishingforum site last year.

Wherever I see a damaged section of a rod on the ground, the rod guide or the section of a damage rod can come in handy one day to be use to repair our damage rod.

Extra guide are always useful in fixing our rod or add more guide to our existing rod. I was able to convert few rods from baitcasting to spinning rod, from long crappie rod to steelhead rods. We can also make a rod longer by adding another section in between.

Aikman at mississauga has old used rod section on sale cheap stocked in a barrel. we can always go check them and hope we can find a match for our damaged rod. They do have 6ft section at times.

Gander mountain in Buffalo sells 10 to 12ft steelhead salmon rod for $50. they go on sale for $30 at times especially after Christmas. Peter's at St catherine also have some Quantum 10' rod around $65.
Find all posts by this user
Add Thank You Quote this message in a reply
[-] The following 1 user says Thank You to fishfight for this post:
MichaelAngelo (05-29-2012)
Post Reply 


Messages In This Thread
Graphite Rod repair needed - MichaelAngelo - 05-16-2012, 01:08 AM
RE: Graphite Rod repair needed - OldTimer - 05-16-2012, 07:55 AM
RE: Graphite Rod repair needed - fishfight - 05-29-2012 08:47 AM

Related Threads
Thread: Author Replies: Views: Last Post
  Braided line for quantum telescopic rod Aquaneko 5 2,627 07-31-2017 07:27 AM
Last Post: Aquaneko
  Fishing St Catherine's area for Catfish, Info needed! Johnnyfishing 0 1,042 06-28-2017 12:59 AM
Last Post: Johnnyfishing
  Rod help. JoshEfishing 0 1,045 06-12-2017 10:42 AM
Last Post: JoshEfishing
  Rod Lure weight ray6591 5 2,802 09-03-2016 07:35 AM
Last Post: ray6591
  Berkley Grayfite rod Fossil Fish 2 2,606 08-30-2016 10:28 PM
Last Post: 4got10
  lost rod, tommy thompson park mwerneburg 0 929 07-31-2016 09:49 PM
Last Post: mwerneburg
  Ice rod for hard water rookie Fossil Fish 3 2,264 12-02-2015 01:43 PM
Last Post: Eli
  new rod selection Fossil Fish 18 8,619 01-30-2015 08:49 PM
Last Post: MuskieBait
  Salmon with this rod? dahliablue 10 5,607 10-11-2014 03:15 PM
Last Post: FishingAssasin
  Fishing rod recommendation for backpacking/survival Aquaneko 10 5,621 07-14-2014 03:49 PM
Last Post: OldTimer

Forum Jump:


User(s) browsing this thread:
3 Guest(s)

[-]
Shout: -
Options
Loading...
Smilies
Popup Shoutbox

Return to TopReturn to Content